Anwenk Adjustable Leveling Feet for Office Desks and Workstations, Ergonomic Stable Setup for Corporate and Home Office
Anwenk Adjustable Leveling Feet for Office Desks and Workstations, Ergonomic Stable Setup for Corporate and Home Office
Couldn't load pickup availability
Why you'll love it
- Commercial-grade 1320 lb total load capacity handles heavy sofas, dining tables, and equipment
- Universal nylon base plus included felt pads means one product works on hardwood, tile, and carpet without buying extras
- Wide 3/4" to 1 3/4" height adjustment solves both slight wobble and significant floor unevenness
- Complete kit with T-nuts and screws means no extra hardware store trips
- Simple screw-in installation for pre-threaded legs or basic pre-drilling for solid wood, accessible to non-professionals
- Stops furniture from sliding on smooth floors and prevents floor scratches
- TIG welding compatibility for a clean flush appearance on custom steel legs
- Screw holes are chamfered to accept flat head screws
- Worked perfectly for spreading/leveling an antique oak desk refinished as a bathroom vanity
- Easy to install on a planer/jointer stand built with 2x4 framing
- Padded feet work well for sliding on wood floors without scratching
- Good hefty, sturdy quality rather than cheap thin steel
- Works better than bolt-on stove levelers because they take up less room under blackstone-type griddles
Perfect for
- Stabilizing wobbly chairs, tables, and sofas on uneven flooring
- Leveling cabinets and bookshelves flush against walls to prevent gaps
- Raising furniture 3/4" to 1 3/4" to clear rugs, vents, or robot vacuums
- Protecting hardwood and tile floors from scratches and chair-drag noise
- Refurbishing secondhand furniture with damaged or missing original feet
- Leveling a 9ft slate pool table on unlevel concrete in a man cave
- Adjusting a workbench on a garage floor with significant unevenness
- Welding the mounting socket to steel tube stock legs for an epoxy table
- Leveling a floor-to-ceiling cat tower by applying back pressure between floor and ceiling
- Building a homemade gun cleaning/sighting stand from scrap wood
- Leveling an outdoor bar on a deck
Featuring-
- Easy to install and adjustable height as your require;
- Suitable for using them in residential or working area;
- Work out perfectly as replacement in your table, office table, sofa, couch, ottoman bench, chair, bed and more!
- Separated felt pads allows your furniture to glide smoothly and quietly.Prevent scratches, scrapes or harsh grating.
NOTE: Leveling feet allows you to adjust the furniture feet height from 3/4” to 1 3/4” for maximum support and adjustability.
More Features...
Support max 1320LBs, universal nylon bottom for all type of floors, perfect choice for heavy furniture.
Steel thread insert and t-nuts, commercial quality standard with long service life.
All black including T-nuts and screws. Our leg levelers can fix your furniture quickly while not compromising the look!
Work on Indoor&outdoor.
Work on heavy furniture.
Leveling feet for ALL wood leg feet.
Height Adjustable for your table desk.
Product Information
✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease ! ✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread; Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. ✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs! ✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/ tile/ carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises. ✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height. T-nuts and installation screws are included.
Brand Anwenk Color 4pack Leveling Feet Size 1.3 inches x 1.5 inches x 1.3 inches Style Modern 3/8"-16 thread furniture leveling feet Item Weight 0.5 Pounds Product Care Instructions Wipe with Dry Cloth Leg Style round Furniture Finish Black Number of Pieces 24 Weight Limit 1320 Pounds Manufacturer Anwenk Product Dimensions 1 x 1 x 3 inches Item Weight 8 ounces
Frequently Asked Questions
Will a wobbly desk actually hurt my focus during long work sessions?
Yes. Even small wobble creates a subtle constant micro-distraction that pulls attention away from the screen. Leveling the desk removes that motion and helps you settle into deep work.
Can I install these on a standing desk converter without tools beyond what is in the kit?
Yes. The kit includes T-nuts, screws, and an adjustment wrench. For threaded legs, installation is a simple screw-in. For solid wood legs, a pilot hole and the included screws are all you need.
Do these work on a height-adjustable desk frame at full standing height?
Yes. The levelers are installed at the base of the desk legs, so they remain effective at any height setting and continue to compensate for uneven floors as the desk moves up and down.
Will the levelers help my rolling office chair stop wobbling on carpet?
If the chair has removable feet or glides, the levelers can replace them and stop wobble on carpet. For chairs with integrated casters, the levelers are designed for fixed-leg furniture rather than rolling chairs.
Can I use these to stabilize a workbench in my garage workshop?
Yes. Customers have installed these on workbenches built from 2x4 framing and on planer and jointer stands to compensate for uneven garage and basement concrete.
Do these work better than the cheap plastic feet that came with my office desk?
Yes. The steel insert and commercial-grade base handle a 330 lb per foot load without cracking or compressing, while the wider 3/4 to 1 3/4 inch adjustment range fixes the kind of significant unevenness that plastic feet cannot compensate for.
Will leveling my desk actually improve my posture?
A level work surface keeps your monitor, keyboard, and mouse at the correct relative heights. If the desk wobbles or tilts, you tend to compensate with your shoulders and wrists, which can lead to fatigue over a long day.
Can I use these in a co-working space where multiple people adjust the same desk?
Yes. Once set, the levelers hold their adjustment during normal use, so a shared desk or hot desk stays level as different users move through the space.
How do I level a desk quickly during a video call if it gets bumped?
Use the included adjustment wrench to turn the base of any foot that has shifted. Adjustment takes only a few seconds per foot and does not require moving the desk or lifting equipment.
Do these work on a sewing table that needs to be perfectly level?
Yes. Sewing, embroidery, and cutting work all benefit from a level surface. The independent foot adjustment lets you fine-tune each corner for a perfectly flat work surface.
Will the levelers survive being moved and re-set up in a new office?
Yes. The steel insert stays installed in the leg, and the base unscrews for transport. After moving, simply screw the bases back in and re-level.
Can I install these on a sit-stand desk with thin steel legs?
Yes. The included T-nut kit installs into wood, and for steel legs you can weld the socket directly to the tube stock for a clean, flush mount. Customers have used this approach for custom epoxy tables.
Do the felt pads help with the noise of a chair dragging across the floor during calls?
Yes. The included high-density felt pads slide quietly on hardwood and tile, eliminating the loud scratch and drag of plastic or metal feet during video calls.
Will the levelers help a wobbly shared library table in a school classroom?
Yes. The independent foot adjustment handles uneven classroom floors, and the 1320 lb capacity covers the load of a full table of students leaning on the surface.
Can I use these on a treadmill or exercise equipment in a home office?
If the equipment has threaded feet or accepts a T-nut, yes. Many customers use similar levelers on gym equipment to stop rocking on basement floors. Verify the thread size matches 3/8-16 before ordering.
Will the levelers keep my monitor from shaking when I type?
Yes. A level desk stops the desk itself from moving, and the felt pads on the leveler base reduce the transmission of vibration into the floor, so monitor shake from typing drops noticeably.
How do I install the Anwenk leveling feet on a pre-threaded furniture leg?
Screw the steel insert directly into the existing 3/8-16 threaded leg by hand, then thread the nylon base onto the insert. Adjust height by turning the base with the included wrench until the furniture is level and the wobble stops.
How do I install the levelers on a solid wood leg with no existing thread?
Drill a 3/8 inch hole in the bottom center of the leg, drop in the included T-nut from inside the leg cavity or from below if the leg is solid, then screw the steel insert into the T-nut. Attach the base and adjust as needed.
How do I weld the socket to a steel tube leg for a custom build?
The mounting socket can be TIG welded directly to steel tube stock. Use the screw holes to clamp the socket in place during fitting, then weld around the base. The chamfered screw holes accept flat head screws for a flush mount when not welding.
Will these levelers fit my furniture that uses a different thread size?
The kit uses a standard 3/8-16 thread, which is the most common furniture leg thread in North America. If your leg uses a finer or coarser thread, you will need a thread adapter or a different leveler model.
Are these compatible with IKEA-style adjustable legs or signature feet?
IKEA legs use a mix of metric thread sizes, most commonly M8 or M10. These levelers use the 3/8-16 standard thread, so they will only fit IKEA legs that use that exact thread or that you can re-tap to 3/8-16.
What is included in the box?
The 4-pack includes four steel threaded inserts, four nylon bases with felt pads, T-nuts and mounting screws for non-threaded legs, and an adjustment wrench. Everything needed for both threaded and basic wood installation is in the kit.
Are the levelers safe for hardwood, tile, and laminate floors?
Yes. The 1 3/8 inch nylon base is floor-safe on hardwood, tile, laminate, and vinyl, and the included high-density felt pads add an extra layer of protection for hardwood and other soft surfaces.
Will the levelers rust or stain the floor over time?
The exposed base is nylon, which does not rust or leave residue. The steel insert sits inside the leg and is not in contact with the floor, so there is no rust risk to the flooring surface.
How do adjustable leveling feet compare to furniture cups or fixed glides?
Furniture cups and fixed glides offer no height adjustment and only work on flat floors. Adjustable leveling feet let you dial in exact height on each corner, so the piece sits truly level even on significantly uneven floors, and they support far higher loads than cups or glides.
