Aubric LED Strip Dimmer 2-Pack – Clean White Remote Controller for Uncluttered Single Color Strip Setups
Aubric LED Strip Dimmer 2-Pack – Clean White Remote Controller for Uncluttered Single Color Strip Setups
Couldn't load pickup availability
Why you'll love it
- 2-pack doubles value for multi-room or multi-zone installations at a budget price
- broad compatibility with the four most common single-color LED chip types (3528, 5050, 5630, 3014)
- memory function restores last brightness/mode after power cycles so no reprogramming needed
- 15m RF range and 433MHz signal work through walls, unlike line-of-sight IR remotes
- flexible pairing lets one remote control many strips OR dedicate a remote per zone
- 10-level dimming plus instant 25/50/100% presets eliminate the need for a wall dimmer
Perfect for
- wirelessly dim and switch single-color LED strip lights from up to 15m away
- add dynamic flashing and speed effects to accent or wall-washer lighting for parties and DJ sets
- retrofit existing 3528/5050/5630/3014 LED strips with remote dimming and memory recall
- control multiple LED zones from one remote or pair remotes for separate zone control
- set quick brightness presets (25%/50%/100%) for shelf, under-cabinet, or task lighting
Aubric 11key RF Mini Wireless Remote Controller
Single Color LED Strip Lights RF Remote Control
Works with 5050 3528 5630 3014 Single Color LED Strip Lights. Remote turn on/off, dim the brightness and change dynamic flashing mode and speed.
Working Voltage
DC 12V-24V. Max Current: 12A. 11 key RF Remote control with 433MHz Frequency. Remote distance: 15m at open area. Please note power adapter is not included.
Wide Application
Simple add this LED controller to remote control your LED lamps, point-source light, flexible strip light, wall washer light, glass curtain wall light and so on, pecfect for DJs, Musicians, Parties and More.
Single Control & Multi Control
One remote is able to control multi receivers by default. If you want separate control, restart the power of the receiver, and within 5 seconds, press and hold "SPEED-" and "SPEED+" buttons at the same time for about 10 seconds until lights flash, now the frequency will be changed and only this remote can control this receiver.
Product Information
Single Color LED Strip Lights RF Remote Control - Works with 5050 3528 5630 3014 Single Color LED Strip Lights. Remote turn on/off, dim the brightness and change dynamic flashing mode and speed. LED Light Dimmer Switch - The LED Remote Controller supports 10 levels brightness adajustment, also with 25% 50% 100% quick brightness change buttons. 8 dynamic modes and 10 levels dynamic speed adjustment. It also built- in automatic shutdown memory function. Wide Application - Simple add this LED controller to remote control your LED lamps, point-source light, flexible strip light, wall washer light, glass curtain wall light and so on, pecfect for DJs, Musicians, Parties and More. Working Voltage - DC 12V-24V. Max Current: 12A. 11 key RF Remote control with 433MHz Frequency. Remote distance: 15m at open area. Please note power adapter is not included. Single Control & Multi Control - One remote is able to control multi receivers by default. If you want separate control, restart the power of the receiver, and within 5 seconds, press and hold "SPEED-" and "SPEED+" buttons at the same time for about 10 seconds until lights flash, now the frequency will be changed and only this remote can control this receiver.
Features & Specs Operation Mode automatic Current Rating 12 Amps Operating Voltage 12 Volts Contact Type Normally Open Connector Type Wireless Switch Type Dimmer Switch Terminal Screw Circuit Type 2-way Mounting Type Panel Mount Actuator Type Remote Control Number of Positions 2 Controller Type remote control,switch control Control Method Remote Connectivity Protocol Wi-Fi Measurements Item Dimensions 5 x 3.5 x 0.27 inches Unit Count 2.0 Count Number of Items 2 Materials & Care Material Type Plastic Contact Material Copper
Frequently Asked Questions
I want fewer remotes on my coffee table, is this small enough to disappear into a drawer?
Yes. The 11-key remote is roughly credit card sized, so it slides into a side table drawer, a tray, or sits flat on a shelf without adding visual clutter. Many minimalist users keep it in a small ceramic dish or magnetic holder.
Can I hide the controller completely and only show the strip and remote?
Yes. The controller is small and is meant to live behind furniture, inside a cabinet, above a ceiling valence, or in a cable management box. Once paired, you interact only with the slim remote.
Will the buttons or remote design clash with a neutral, all-white interior?
The remote is a simple, low-profile design with clearly labeled buttons and no flashy branding. It sits comfortably in a white, beige, or wood-tone room without pulling focus.
I do not want an app, an account, or Wi-Fi just to dim a strip, is that possible?
Yes. This controller is fully offline. There is no app, no account, no firmware, and no Wi-Fi pairing. You press a button on the small remote and the strip responds. That is the whole experience.
Will 10 brightness levels feel like too many choices for a minimalist setup?
Most minimalist users stick to three or four favorite levels, and the 25/50/100 percent quick-select buttons make it easy to ignore the rest. You can effectively treat it as a 3-step dimmer if you want, with finer control available when you need it.
Can I use one remote to control every strip in a small apartment for a clean, unified look?
Yes. You can pair multiple controllers to a single remote, so the same button press adjusts shelves, under-cabinet, and headboard strips together. That keeps the room feeling intentional and uncluttered.
Can I split zones so the bedroom and living room are independent with minimal extra hardware?
Yes. Pair controller A to remote 1 and controller B to remote 2, and you have two independent zones. The 2-pack is designed exactly for this kind of clean, separate zone control without extra hubs.
How does this compare to a smart LED controller for a minimalist home?
A smart controller adds an app, a phone, voice assistants, and usually a hub. For a minimalist, all of that is friction. This RF dimmer does one thing, with one small remote, and gets out of the way.
How does this compare to a wall-mounted LED dimmer for a clean wall?
Wall dimmers require cutting into drywall, running wire, and adding another visible switch plate. This controller is hidden, and the remote is the only thing that touches the room, so your walls stay bare and clean.
How does this compare to a dimmer that uses a touch panel or glass control?
Touch panels and glass controllers look great in catalogs but are usually larger, need a clean mounting surface, and often need wiring. A small RF remote is even more minimal because there is nothing mounted at all, just a remote you can put away.
Will the dynamic modes tempt me to use them and break the calm of the room?
Only if you want to. The remote has a static dim mode that is fully separate, and the memory function will keep you in static mode across power cycles. Flashing is one button away when you want it, but it never turns itself on.
What if I want to remove the strips later, will the install leave marks?
The controller is connected by low-voltage wire and usually lives behind furniture or inside a cabinet. The LED strips themselves are typically adhesive-backed and come off cleanly from most surfaces. There are no holes, screws, or switch plates to patch.
Is the packaging minimal, or is it full of plastic I will throw away?
The kit ships as two small controller units and two remotes in a compact retail box. There is no oversized blister packaging or extra accessories to discard.
Will two remotes feel like clutter if I want to keep things very clean?
Pair both controllers to a single remote and put the spare remote in a drawer. You get the multi-zone capability of the 2-pack with only one remote visible in the room.
What if I live in a small rental and cannot modify the walls, is this still a good minimalist choice?
Yes. There is no drilling, no new switch boxes, and no wall plates. The strips are adhesive, the controller hides behind furniture, and the remote is the only thing in the room. It is one of the cleanest lighting upgrades for renters.
Will the indicator lights on the controller or remote glow brightly at night and disturb a dark room?
The remote has small, low-intensity buttons that do not flood the room with light. The controller is typically hidden out of sight. If you are very light-sensitive, a piece of tape over the controller's indicator is usually enough to keep the room fully dark.
How do I pair the remote to the LED strip controller?
Power the controller, then press and hold the SPEED- and SPEED+ buttons on the controller for a few seconds until the connected strip flashes or blinks. The remote is now paired. Pairing only needs to be done once, and the memory function keeps the link through power cycles.
How do I reset the dimmer if I want to start over or pair to a new remote?
Power cycle the controller, then press and hold the SPEED- and SPEED+ buttons again to clear the pairing. The controller is now ready to be paired with any remote. You can also use this step to unpair a remote and dedicate a controller to a single zone.
How do I switch between static dim mode and the flashing modes?
Use the dedicated mode button on the remote to cycle through static dim, the 8 dynamic flashing patterns, and back to static. Speed is adjusted with the SPEED- and SPEED+ buttons, and brightness with the up and down dim buttons.
Does this work with my existing 3528 single color LED strip?
Yes. 3528 single-color strips running on 12V or 24V are fully supported. The controller sits between your power supply and the strip and dims all standard 3528 runs up to its 12A current limit.
Does this work with 5050, 5630, and 3014 single color LED strips?
Yes. The controller is designed for single-color 3528, 5050, 5630, and 3014 strips on 12V or 24V. It is not designed for RGB or RGBW strips, which need a 3-channel or 4-channel controller.
What is in the box, and what do I need to buy separately?
The box includes two mini RF LED dimmer controllers and two 11-key remotes. You will need to supply a compatible 12V or 24V LED power supply, your single-color LED strip, and basic low-voltage wire or strip-to-controller connectors. Strips and power supplies are not included.
Is it safe to leave this dimmer plugged in 24/7?
Yes, when used with a properly sized 12V or 24V power supply. Make sure the power supply is rated for at least the total wattage of the strips you connect, and that the controller's 12A current limit is not exceeded. Avoid enclosing the controller in a fully sealed, unventilated space.
Will the memory function drain my strip or waste power when the lights are off?
No. When the strip is off, the controller is in standby and only draws a tiny amount of current to remember the last setting. There is no meaningful power waste, and your strips will not be dimly lit in the off state.
What is the difference between an RF LED dimmer and an IR LED dimmer?
An IR dimmer needs a clear line of sight and a short range, like a TV remote. An RF dimmer uses radio frequency at 433MHz, works through walls and furniture, and reaches up to about 15 meters in open areas. For shelves, cabinets, and hidden installs, RF is the more practical choice.
