AUXITO 194 LED Bulbs for Clean Factory-Style Interior, Simple Plug-and-Play 6000K White for License Plate and Dome Swap, Pack of 2
AUXITO 194 LED Bulbs for Clean Factory-Style Interior, Simple Plug-and-Play 6000K White for License Plate and Dome Swap, Pack of 2
Couldn't load pickup availability
Why you'll love it
- Plug-and-play install requires no wiring, resistors, or modification
- CANbus error-free design prevents annoying dashboard warning codes on modern vehicles
- 360-degree lighting with 24 SMD chips eliminates dark spots compared to single-point LEDs
- Wide cross-fit compatibility (194, 168, 175, 2825, W5W, T10) covers most car bulb sockets
- Multiple color options (white, red, amber, blue) enable both functional and aesthetic upgrades
- Low 2W power draw reduces strain on the vehicle electrical system and extends bulb life
Perfect for
- Replace dim halogen license plate bulbs with bright 6000K white LED for a cleaner look
- Upgrade interior dome, map, and reading lights for better cabin visibility at night
- Swap glove box, trunk cargo, and courtesy lights for easier item-finding in dark compartments
- Add a colored accent (red, amber, blue) to turn signal or marker lights for custom styling
- Fix dashboard error-free LED conversion on CANbus-equipped vehicles without triggering warning codes
Product Information
Voltage: 12V, color: 6000K xenon white, power: 2w/pc, lumen:500lm, dimensions: 1 by 0.47 inches, net weight: 2g/pc. Low power consumption for longer lifespan Each bulb has 24 pieces of 3014 led chips on it, 360 degree lighting angle, no blind spot, super bright brings your car a refreshed new look Fit bulb sizes: 168, 175, 194, 2825, W5W, T10, etc. Easy to install, just plug and play. Canbus error free, no error after installation Wide application: These led bulbs can be used for license plate tag light, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, reading lights, glove box lights, inner tail light bulb, etc Package includes 2 pieces of AUXITO 194 led bulbs. Note: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm
Technical Details Brand AUXITO Specific Uses For Product license plate tag light, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, reading lights, glove box lights, inner tail light bulb, etc Brightness 500 Lumen Item Package Quantity 2 Color Xenon White Auto Part Position Inside, Rear Light Output Maximum 500 Lumens Manufacturer AUXITO Automotive Fit Type Vehicle Specific Fit OEM Part Number 194,168,2825,W5W,T10 Model T10-24H-Black-W2-24V Item Weight 0.071 ounces Product Dimensions 0.39 x 0.39 x 1.02 inches Item model number T10-24H-Black-W2-24V Is Discontinued By Manufacturer No Exterior Machined Manufacturer Part Number AUXITO-US24HT10W2-230914 Mirror Lighting Type automotive-exterior-parking-light-bulbs, automotive-interior-map-light-bulbs, automotive-interior-dome-light-bulbs, automotive-interior-glove-box-light-bulbs, automotive-exterior-license-plate-light-bulbs Voltage 12 Volts
Frequently Asked Questions
Will these bulbs fit cleanly into my factory socket without adapters or extra parts?
Yes. The T10 wedge base is a direct fit for 194, 168, 175, 2825, and W5W sockets, so no adapters, clips, or extra wiring are needed for a clean, tool-free install.
Does the bulb profile stay hidden behind my license plate lens for a stock look?
Yes. The 1 x 0.47 inch form factor sits within the standard T10 socket depth, so the bulb remains fully concealed behind the license plate lens and dome light cover for an OEM appearance.
Can I achieve one consistent white tone across all my interior lights with this single product?
Yes. Every bulb in the pack is color-matched at 6000K, so swapping all your interior and exterior T10 sockets at once yields a unified, intentional look throughout the vehicle.
Will the install leave loose wires or extra components cluttering my light housing?
No. The bulbs are entirely self-contained, with no external resistors, wiring harnesses, or modules, so the factory housing remains clean and uncluttered after installation.
Does the 360-degree emission pattern matter for symmetrical light output behind a clear lens?
Yes. The 24-chip 360-degree design ensures light exits evenly in all directions, which prevents the half-lit or dim-spot appearance common with cheaper directional LEDs behind clear license plate lenses.
Is this a good simple upgrade for a daily driver with no customization experience?
Yes. The plug-and-play design means you can complete the entire swap in under five minutes per bulb with no tools, making it an ideal first modification for any car owner.
How long does the actual installation take for a first-time user?
Most users complete a single bulb swap in 1 to 2 minutes. A full interior overhaul (dome, map, trunk, glove box) typically takes 15 to 20 minutes from start to finish.
Do I need any special tools to complete the install?
No tools are required. A small flat screwdriver can help pry off some dome light lenses, but the bulb itself installs and removes by hand using a simple pull-and-push motion.
Will these look obviously aftermarket or close to factory?
At 6000K xenon white, the result looks like a modern factory LED rather than a blue-tinted aftermarket bulb. Most observers cannot tell the bulbs have been swapped unless they look closely.
Is there a visual difference between this LED and a standard halogen that might bother me?
The 6000K tone is noticeably whiter and crisper than the warm yellow of a halogen. If you prefer a stock halogen look, a 3000K or 4300K bulb would be closer, but the AUXITO 6000K is the most popular modern choice.
How does this compare to a generic T10 LED from a local auto parts store?
Generic T10 LEDs often use fewer, lower-quality chips, lack CANbus circuitry, and have inconsistent color matching. AUXITO uses matched 3014 SMD chips with a stable driver for reliable, uniform output.
Do I need to buy a separate decoder or load resistor for a clean install?
No. The built-in CANbus circuitry eliminates the need for an external decoder on most vehicles, keeping the install as simple as a halogen bulb replacement.
What if one bulb fails prematurely after install?
AUXITO backs the bulbs with a standard warranty. If a bulb fails within the coverage window, contact customer service for a replacement pair rather than troubleshooting the socket.
How do I install these T10 LED bulbs in my vehicle?
Locate the bulb socket, gently remove the existing halogen bulb by pulling straight out (or twisting if a locking collar is present), insert the AUXITO LED bulb into the T10 wedge base, and reinstall the lens cover. No tools or wiring modifications are required for the standard 194, 168, 175, 2825, and W5W sockets.
Can I install these bulbs in both interior and exterior light sockets?
Yes. The T10 wedge base is used in many interior positions (dome, map, courtesy, glove box, trunk) and exterior positions (license plate, side marker, tag light). Confirm the existing bulb type matches 194, 168, 175, 2825, W5W, or T10 before installing.
How long do these LED bulbs typically last?
LED bulbs of this type commonly last 30,000 to 50,000 hours of normal use, which for typical vehicle applications translates to many years of service life, far outlasting the 1,000 to 2,000 hour lifespan of a standard halogen bulb.
Will these bulbs fit my specific vehicle make and model?
These bulbs fit any vehicle that uses a 194, 168, 175, 2825, W5W, or T10 bulb in the target socket. Check your owner's manual bulb specification chart, or remove the existing bulb to confirm the base type before ordering.
Are these bulbs compatible with both 12V and 24V electrical systems?
These bulbs are rated for 12V systems, which covers all standard gasoline and diesel passenger vehicles. For 24V commercial trucks, a 24V-rated LED variant is required.
What is included in the box when I order?
The package includes the specified quantity of AUXITO T10 LED bulbs (pack of 2 in this listing) in protective retail packaging. No additional resistors, decoders, or wiring adapters are required for the standard plug-and-play installation.
Do I need to buy any extra parts or accessories to complete the install?
No. The built-in CANbus circuitry and direct-fit T10 base mean the bulbs install using only what is in the box. Some vehicles with very strict bulb monitoring may benefit from an optional external CANbus decoder, but this is uncommon.
What should I do if a bulb arrives damaged or does not work on install?
Contact AUXITO customer service with your order number and a brief description of the issue. Warranty claims are processed quickly, and most customers receive a replacement pair without needing to return the original bulbs.
Are these LED bulbs dimmable with my vehicle's interior lighting dimmer?
Most factory-installed dimmers for dome and map lights will work with these LED bulbs. Some aftermarket PWM-style dimmers may cause a faint high-frequency flicker, which is normal and does not damage the bulb.
What is the difference between these T10 LED bulbs and standard 194 halogen bulbs?
Standard 194 halogen bulbs produce a warm yellow light at around 5W with a 1,000 to 2,000 hour lifespan. The AUXITO T10 LED produces a 6000K xenon-white light at 2W, with 360-degree emission from 24 SMD chips, a 30,000+ hour lifespan, and CANbus-error-free operation on modern vehicles.
