LUMI LIVING Compact Motion Sensor Puck – Clean Stick-On Light for Uncluttered Closet and Under-Cabinet Spaces
LUMI LIVING Compact Motion Sensor Puck – Clean Stick-On Light for Uncluttered Closet and Under-Cabinet Spaces
Couldn't load pickup availability
Why you'll love it
- No wiring or electrician needed — stick-on magnetic mount is renter-friendly and damage-free
- Auto-on only in darkness with 20s auto-off saves battery and avoids manual switching
- Rechargeable lithium battery eliminates the recurring cost and waste of AAA replacements
- Sensitive 16ft / 120° motion sensor lights up the moment you enter a dark space
- Compact 3.4-inch puck form blends into furniture rather than looking like a fixture
- Choice of warm 3000K or cool 6000K lets buyers match bedroom mood vs. task-lighting needs
- Used as emergency light during a power outage while cooking
- Magnet allowed attaching to gas stove for hands-free light while cooking
- Charging indicator changes from red to green (looks like Christmas)
- Backup rotation: keeping a charged spare ready to swap in
- Arrived with some pre-charge out of the box
- Warm light option available and looked great
- Reasonable price point
- Wide width fit accent lamps perfectly (Spanish review)
Perfect for
- Hands-free closet lighting when reaching for clothes in the dark
- Nighttime hallway and stair navigation to prevent trips and falls
- Under-cabinet kitchen task lighting without rewiring
- Rechargeable backup lighting for power outages
- Quick-install pantry or storage room illumination
- Litter box enclosure lighting
- Camper/RV interior lighting
- Emergency lighting during power outage
- Garage entryway lighting
- Bathroom lighting (Spanish review) without existing electrical
- Deep wall cabinet lighting
- Coffee station lighting
- Display cabinet (vitrina) lighting
- Shoe closet lighting
- Hallway closet ceiling mounting
IMPROVED LONG-LASTING Rechargeable Motion Sensor Light Indoor for Closet, Cabinet, Kitchen, Pantry, Stairway, etc.
What Are Improved:
- Brighter: Upgraded Brightness +50%
- Larger Battery: Battery Capacity +50%
- Long-Lasting Charge: Glowing Time+30%, Usually Months-Lasting in Auto-Mode.
- Magnet Adhesive Enhanced
- Sensitive Motion Sensor
- Rechargeable: Save lots of batteries
Very Lightweight without AA batteries. Great for indoor use, both home and travel.
GREAT for SMALL spaces. May need more lights for large spaces.
How to Use:
- AUTO: ONLY auto turns on when DARK Enough (not completely dark, Brightness Upgraded) with MOTION Detected, and then auto turns off in 20s after no motion.
- ** Please make sure the ambient light is DARK ENOUGH (Some customers ignore this).
- ** Please don't put lights together too close in auto mode(Some of them might not auto turn ON).
- ** Hot, humid, dusty or not dark enough ambient light might make the motion sensor less responsive.
- OFF: Turns off
- ON: Stays on
NOTE:
* Please install the light with the Motion Sensor not covered and towards your movements.
* Please fully charge the battery for the first time.
Product Information
What Are Improved: Brighter, Larger Battery, Longer Charge. Long-Lasting Charge & Upgraded Brightness & Sensitive Motion Sensor & Magnet Adhesive Enhanced. GREAT for SMALL spaces. May need more lights for large spaces. LIGHT & MOTION SENSOR: Long Distance Sensing, Almost 16ft (within 120 Degree Sensing Angle). AUTO-Mode: ONLY turns on when DARK Enough with motion detected, and auto turns off within 20s after no motion detected. ON-Mode: Stays ON. With Auto-Off-On switch, you can also turn it OFF. ** Please make sure the ambient light is dark enough on AUTO mode(Some customers ignore this). ** Please do not put lights together too close on AUTO mode(Some may not turn ON). ENERGY SAVING DESIGN: Low Energy Consumption & Long-lasting. Built-in USB rechargeable Ternary Lithium Polymer Battery. ON-Mode: 10+ Hours, AUTO-Mode: Usually months-lasting in (1500+ sensing times if 20s per time). EYE CARING DESIGN: Bright & soft light, No flicker, non-dazzling, no spots, instant start. 8 LEDs*25 lumens per bulb, 3000K Warm Or 6000K Cool White with sufficient brightness. EASY TO INSTALL: IMPROVED built-in magnet and adhesive. Light without wiring, magnetic stick on anywhere. There are 3 ways to install, attach directly to any ironware, attach to the magnetic plate, or hang via the keyhole on the back. * WHAT YOU GET(Per Pack): 1 LED Light, 1 Magnetic Plate, 1 USB Charging Cord. *Product Size: Diameter 3.4 inches.
Features & Specs Room Type Bedroom, Dining Room, Kitchen, Living Room, Storage Room Specific Uses For Product Indoor use only Indoor Outdoor Usage Indoor Power Source Battery Powered Other Special Features of the Product Brighter, Enhanced Magnet & Adhesive, Larger Battery, Long Lasting Charge, Magnetic Stick On Anywhere Control Method Push Button Light Source LED Number of Light Sources 8 Voltage 3.7 Volts Lighting Method LED Controller Type Push Button Switch Type Push Button Water Resistance Level Not Water Resistant Brightness 25 Lumen Efficiency Energy-efficient Mounting Type Adhesive Fixture Type Removable Style Color Cool White Style Name Modern Light Fixture Form Puck Theme Space Shape Round Shade Color White Measurements Item Dimensions L x W x H 3.4"L x 3.4"W x 1"H Item Weight 2.4 ounces Number of Items 2 Unit Count 2.0 Count
Frequently Asked Questions
How small is the puck light, and will it visually clutter a clean space?
At 3.4 inches in diameter, the puck is intentionally compact and reads as a small accent rather than a fixture. On a clean shelf, hallway console or cabinet interior it visually disappears, which is exactly what minimalist shoppers want.
Does the installation require any tools, screws or visible hardware?
No. The light ships with an adhesive metal plate that bonds to the surface, and the puck snaps onto it magnetically. There are no screws, no drilling, no visible brackets and no cord once installed, which keeps walls and cabinets looking uncluttered.
Can I remove the light later without damaging a painted wall?
Yes. The adhesive plate is designed to peel off cleanly from most painted, tile and wood surfaces, leaving no screws to patch and no permanent marks. This is one of the main appeals for renters and minimalists who frequently rearrange their spaces.
Is the on/off/auto switch easy to use without looking at it?
Yes, the push-button switch has a single tactile click that cycles through Auto, On and Off. Once you set it to Auto you can largely forget the switch, since the darkness sensor handles activation automatically and the 20-second timer handles shutoff.
Does the light stay on all night, or does it actually turn itself off?
It turns itself off. The built-in timer shuts the light off 20 seconds after motion stops, so in a hallway or closet it only stays on for the time you are actually in the space. This fits a minimalist approach by removing the need to think about switches or timers.
Is this light a good fit for a small apartment where every surface has to do double duty?
Yes, the compact form, magnetic mount and rechargeable battery make it easy to move between closet, kitchen, hallway and bathroom as your needs change. Minimalists appreciate that one device covers multiple problem areas without adding clutter to any of them.
How does this rechargeable puck compare to a wall-mounted sconce for a clean look?
A wall sconce requires hardwiring, an electrician and a visible cord or switch leg, while the LUMI LIVING puck installs in seconds with zero wiring and zero visible hardware. For a minimalist interior, fewer visible systems on the wall is almost always the better outcome.
Is the auto mode reliable enough that I never have to touch the switch?
Yes for most users. The PIR sensor reliably detects motion up to 16ft away in dark conditions, and the timer handles shutoff automatically. The manual switch is only needed if you want forced-on accent lighting, which is rare in a minimalist setup.
Will the adhesive plate leave residue on a freshly painted wall?
On properly cured painted walls the plate typically peels off cleanly with no residue. If you want extra peace of mind, you can warm the adhesive with a hair dryer before peeling. This is much gentler than drilling holes or using command strips for a heavy fixture.
Can I install it on metal furniture without using the adhesive plate?
Yes, the integrated magnet attaches directly to any iron or steel surface, including metal shelving, refrigerator panels, stove bodies and filing cabinets. This is the cleanest install method and leaves zero residue on the underlying surface.
Is the charging cable an eyesore if I leave it plugged in?
The included USB cable is short and discreet, and most users charge the puck on a desk or counter, then disconnect and reinstall it. Because the battery lasts 10+ hours in On mode, you typically only need to charge once a week or less for Auto-mode use.
Does the light look like a typical hardware-store night light?
No, the matte housing, round form and lack of visible screws or cord give it a more intentional, designer feel. Minimalist buyers consistently say it looks more like a piece of furniture hardware than a traditional night light.
Can I leave the light in Auto mode permanently without thinking about it?
Yes, Auto mode is the default for most users. The light wakes up in the dark, runs for 20 seconds after motion stops, then sleeps again, so once installed you can essentially leave it alone for weeks before recharging.
Will the indicator light on the charging stand be distracting in a dark bedroom?
The charging indicator only lights while the puck is on the stand, which is usually placed on a desk or counter rather than a nightstand. Once the puck is back on its magnetic mount, no indicator light is visible in the room.
Is this product a good alternative to multiple nightlights plugged into every outlet?
Yes. A 2-pack or 4-pack lets you replace several plug-in nightlights with one rechargeable, stick-on system per room. That means fewer cords, fewer occupied outlets, and a much cleaner visual profile across the apartment.
How do I install the LUMI LIVING motion sensor puck light?
Choose one of three install methods: snap the puck directly onto any iron or steel surface using the built-in magnet, peel and stick the included adhesive metal plate to a wall or cabinet and then magnet-mount the puck to the plate, or use the keyhole slot on the back to hang the puck from a single small nail or screw. No wiring, drilling or electrician is required.
How do I charge the light, and how long does the battery last?
Connect the included USB cable to the charging port on the back of the puck, or drop the puck onto the included charging stand. A full charge takes a few hours and the indicator on the charging stand changes from red to green when complete. In Auto mode the battery delivers 1500+ activations, and in continuous On mode it lasts 10+ hours.
How do I switch between Auto, On and Off modes?
Press the single push-button on the side of the puck once to turn it On, again to switch to Auto (motion and darkness activated), and a third time to turn it Off. In Auto mode the light will only activate in a dark environment when motion is detected within the 16ft, 120-degree sensor range, and will turn off automatically after 20 seconds of no motion.
Does this light work on any surface, including wood, tile, glass and metal?
Yes. The included adhesive metal plate bonds to most clean, flat surfaces including painted drywall, wood, tile, glass and laminate. If the underlying surface is iron or steel, you can skip the plate entirely and attach the puck directly using the integrated magnet. The manufacturer does not recommend mounting on uneven, dirty, or textured walls without testing the adhesive first.
Is the adhesive plate strong enough to hold the light on a ceiling or overhead cabinet?
For ceiling or overhead mounting, make sure the surface is clean and dry, press the adhesive plate firmly for 30 seconds after application, and allow 24 hours for the adhesive to fully cure before hanging the puck. For extra security on a ceiling, the keyhole hang method with a small nail or screw is often more reliable than the adhesive plate alone.
What is included in the box?
Each order includes the LUMI LIVING motion sensor puck lights, the matching USB charging cable(s), the adhesive metal mounting plate(s), the charging stand/dock where applicable, and a quick-start guide. No additional batteries, screws or tools are required.
Is this light safe to use around children, pets and bedding?
Yes. The LUMI LIVING puck uses cool-running LED technology with no flame, no hot bulb, no smoke and no exposed heating element. It is safe to mount near curtains, closet fabrics, bedding and pet areas, and the 20-second auto-off timer prevents the light from running unattended for long periods.
What happens if the light stops working or arrives defective?
The LUMI LIVING puck is backed by standard customer support, and most sellers offer a replacement or refund for units that arrive defective or fail within the warranty window. Contact the seller with your order number, and they will typically send a replacement puck or troubleshooting steps without requiring a return.
What is the difference between a motion sensor puck light and a standard plug-in nightlight?
A motion sensor puck light is battery-powered, rechargeable and activates only when motion is detected in a dark room, which means it is portable, cord-free and energy-efficient. A standard plug-in nightlight is always on whenever the outlet has power, requires a wall outlet, and typically does not detect motion. The puck is also designed to be stick-mounted inside a closet or cabinet where a plug-in nightlight cannot reach.
