Lumichoice AuraGlow LED Strip Lights – Low-Heat 12V Tape for Kids and Pet Safe Bedroom Lighting, 6500K Dimmable
Lumichoice AuraGlow LED Strip Lights – Low-Heat 12V Tape for Kids and Pet Safe Bedroom Lighting, 6500K Dimmable
Couldn't load pickup availability
Why you'll love it
- Plug-in 12V power means no recurring battery charging compared to USB-rechargeable strip lights
- Cuttable design and 3 length options (20ft/40ft/66ft) let buyers fit any room without buying excess
- 11-level dimming and 60-second delay-off give bedroom-friendly control without getting out of bed
- Low-heat 12V design is safe to touch around kids and pets, unlike older halogen strip setups
- Peel-and-stick installation with included clips and screws avoids drilling or hiring an electrician
- 1440-lumen bright 6500K cool white output doubles as functional task lighting, not just decoration
- Adhesive is extremely strong and bonds nicely without lifting
- Multiple dimming options on the remote allow fine-tuned brightness
- Strip can be cut to custom length and still function
- Works well on a timer for automated use
- On lowest setting, a short strip still fully lights a tent
- Even at highest setting can turn 'night into day'
- 8mm width compatibility with standard LED strip connectors
- Strong adhesive holds in difficult/inconvenient install locations
Perfect for
- Under-cabinet task lighting in kitchens for brighter meal prep without rewiring
- Bedroom ceiling or headboard ambient lighting with adjustable brightness
- Stairway and hallway safety lighting to reduce trip hazards at night
- Mirror backlighting for bathroom or vanity grooming setups
- Cuttable custom-length accent lighting for shelves, desks, or entertainment centers
- Lighting the inside trim/border of a tent for camping
- Powering a small machine for task lighting in a tight area
- Halloween prop/frame decoration
- Optical store light board display
- Adding scheduled lighting to quail cages
- Lighting a walk-in closet
- Lighting a battery cabinet
Frequently Asked Questions
Is the LED strip safe to touch after it has been on for hours?
Yes, the 12V low heat design stays cool to the touch even after long run times. This is a major advantage over older halogen strip lights and is much safer around curious children and pets.
Can I use this strip as a stairway night light to prevent trips and falls?
Yes, mounting the strip along the edge of stair treads or under the stair nosing is one of the most popular safety uses. The 6500K cool white output provides clear visibility of each step at night, reducing trip hazards.
Is this safer than running candles or open flame lights in a bedroom?
It is dramatically safer. There is no flame, no hot wax, no smoke, and no hot surface. The strip is cool to the touch and runs on low voltage 12V, so you get the cozy ambiance without any of the fire or air quality risks of candles.
I have a toddler and a cat. Is the strip safe if they touch it or pull at it?
The strip itself runs cool and low voltage. For extra security, use the included mounting clips and screws so the strip cannot be peeled off by curious hands or paws, and route the 12V cable along a wall edge or behind furniture.
Does the 60 second delay off feature make it safer for kids who are afraid of the dark?
Yes, the 60 second delay off lets your child get into bed and settled before the light fully powers down, which makes it a much gentler experience than a sudden blackout and reduces nighttime anxiety.
How does this compare to battery powered LED strips in terms of fire or heat risk?
Battery powered strips are generally safe but introduce the risk of leaking or swelling batteries if left plugged in for long periods. A 12V plug in strip removes that battery risk entirely and runs cooler for extended use.
Can I leave the strip plugged in 24/7 for a closet or hallway without overheating?
Yes, the 12V 1A adapter and LED strip are designed for continuous duty. The strip runs cool, the adapter is UL style safety rated, and the built in timer can cycle the strip on and off so it is only running when needed.
Is the strip safe to use inside a tent while camping with a generator?
Yes, the 12V low voltage design is safe for tent interiors and works well with portable power stations and generator 12V or inverter outputs. Just keep the adapter dry and route the cable away from the tent floor to avoid tripping.
Will the strip overheat if I mount it inside an enclosed space like a cabinet or closet?
No, the 12V low heat design is well suited for enclosed installations like closets, cabinets, and display cases. The strip does not require ventilation the way halogen or incandescent strips do.
I have a senior parent who gets up at night. Is this safe enough to leave on in a hallway?
Yes, the cool to the touch low voltage design is ideal for senior bedrooms and hallways. Combine it with the timer function so the strip turns on at typical wake up hours and powers off automatically, providing gentle safety lighting without anyone touching a switch.
Are there any fumes or off gassing from the strip like older lighting?
No. The LED strip does not burn anything to produce light, so there is no smoke, no fumes, no off gassing, and no UV. It is a clean air friendly alternative to candles, oil lamps, and older halogen strip fixtures.
What happens if my pet chews the cable?
Like any electrical cable, damage should be addressed immediately. The 12V output is low voltage so the risk of serious shock is reduced, but you should inspect cables regularly if pets have access and replace the run if insulation is damaged.
Is the adhesive backing safe for painted walls or will it peel the paint?
The adhesive is strong but on properly primed interior paint it usually releases cleanly with a hair dryer for heat softening. On flat or matte paint, test a small section first or rely on the included clips and screws for a fully reversible install.
Can I use this in a nursery or child bedroom without any safety concerns?
Yes, the strip is one of the safer lighting options for nurseries because it stays cool, has no hot bulb, no glass to shatter, and no flame. Mount it out of reach with the included clips and use the delay off timer to gently transition to sleep.
How do I install the LED strip lights?
Clean the mounting surface with isopropyl alcohol, peel off the adhesive backing, press the strip firmly in place, and plug the 12V adapter into a standard wall outlet. Use the included clips and screws at the ends of long runs for extra security.
Can I cut the strip to a custom length, and what happens to the leftover piece?
Yes, the strip can be cut at the marked intervals and the remaining section will still work as long as it is connected to a power source. You can use an off the shelf 8mm connector to extend or rejoin segments, or use the leftover piece on a separate surface.
How do I set the timer function?
Press the timer button on the remote and the strip will run for 6 hours on and 18 hours off in a repeating daily cycle. To cancel the timer, press the timer button again. The setting is remembered through power cycles.
Will this strip work with standard 8mm LED strip connectors and extensions?
Yes, the 8mm width is the industry standard format, so the strip is compatible with off the shelf 8mm solderless connectors, extension cables, and L shaped or T shaped corner connectors. This makes custom layouts and corner turns easy.
Is the power adapter compatible with the electrical outlets in my country?
The 12V 1A adapter is available in US, EU, and UK plug variants depending on the seller. Check the listing for the specific plug format before ordering to make sure it matches the outlets where you plan to install the strip.
What is included in the box?
You receive the LED strip in your chosen length, a 12V 1A plug in adapter, a remote control, a small inline controller box, 6 mounting clips, and 6 screws. Everything needed for a basic install is in the box, no extra accessories required.
Is the strip safe to leave plugged in continuously?
Yes, the 12V 1A adapter and LED strip are designed for continuous duty and run cool to the touch. For long term unattended use, pair the strip with the built in timer so it cycles on and off automatically.
Will the adhesive damage my walls or paint when I remove it?
On properly primed interior paint, the adhesive usually releases cleanly. Warm the strip with a hair dryer to soften the adhesive first, then peel slowly. Any remaining residue can be removed with a bit of Goo Gone or rubbing alcohol.
What is the difference between this strip and a color changing RGB LED strip?
A color changing RGB strip can display red, green, blue, and mixed colors, which is fun for parties and gaming setups. This strip is a single 6500K cool white, which delivers a cleaner, more sophisticated, task grade light that is better suited for kitchens, bedrooms, and work areas where you want bright neutral illumination.
