WORKPRO 12" Adjustable Oil Filter Pliers – Driveway Maintenance Tool, Removes Seized Filters Anywhere You Park
WORKPRO 12" Adjustable Oil Filter Pliers – Driveway Maintenance Tool, Removes Seized Filters Anywhere You Park
Couldn't load pickup availability
Why you'll love it
- Bent head design reaches into cramped engine bays where straight pliers fail
- Adjustable jaw covers a wide 2-3/8 to 4-1/2 inch range so one tool fits most cars and light trucks
- High carbon steel construction resists flexing and breaking under high torque
- Permalock fastener prevents the pivot bolt from loosening or failing mid-job
- Soft nonslip red grips provide extra reach and leverage while protecting hands
- Doubles as a pipe wrench for conduit and fittings, adding value beyond oil changes
Perfect for
- Removing stuck or over-tightened oil filters during routine oil changes
- Loosening oil filters in tight engine bays where clearance is limited
- Gripping and turning round conduit pipes and plumbing fittings
- Breaking free filters seized by heat and corrosion on older vehicles
- Reaching down into recessed filter wells on transverse-mounted engines
More to Choose
 Oil Filter Wrench Set |  Oil Filter Socket Wrench |  Oil Filter Socket Wrench |  Oil Filter Socket Wrench |  Oil Filter Wrench |  1/4" Drive Socket Set |  Oil Filter Wrench | |
|---|---|---|---|---|---|---|---|
|
Range
| 2-3/4 to 5-1/8" (68 to 130 mm) | 36mm | 32mm | 27mm | 2-3/8 to 3-3/4" (60 to 95 mm) | — | 2-3/8 to 4-1/2" (60 to 102 mm) |
|
Adjustable
| Yes | No | No | No | Yes | — | Yes |
|
Oil for Rust Protection
| Yes | Yes | Yes | Yes | Yes | — | Yes |
|
WORKPRO
| — | — | — | — | — | — | — |
|
WORKPRO
| — | — | — | — | — | — | — |
Accommodates most common size car and small engine filters
- Bent angle design for some tight space
- Oil for rust protection
- Unless the tool has actual scratch marks on the teeth or cuts to the rubber, the tool is new
- Good combination with funnel oil drain pan for oil change
Grip
- High carbon steel for strength and reliability
- Little oil for protection
- Bent angle design for easier use
Handle
- Soft, nonslip red grips offer extra reach and leverage in tight places
- Environment-friendly material
Jaw capacity
- Jaw capacity: 2-3/8 to 4-1/2 inches (60 to 102 millimeters)
- 3 adjustment positions
Product Information
TIPS: 1. BENT head design for easier use in some tight space; 2. OIL on product for rust protection (not used) Permalock fastener eliminates nut and bolt failure High carbon steel for strength and reliability Fits oil filters from 2-3/8 to 4-1/2 inches (60 to 102 millimeters) in diameter Soft, Nonslip Red Grips Offer Extra Reach And Leverage In Tight Places
Color Red Brand WORKPRO Material High Carbon Steel Item Weight 1 Pounds Item Package Quantity 1 Finish Type Black Finish Operation Mode Mechanical Manufacturer WORKPRO UPC 820909750642 Global Trade Identification Number 00820909750642 Product Dimensions 12 x 3.54 x 1.57 inches Item Weight 1.03 pounds
Frequently Asked Questions
Can I use these pliers for plumbing fittings and conduit, not just cars?
Yes. The adjustable jaw is well suited for gripping round conduit and plumbing fittings, which is why many electricians and plumbers keep a pair alongside their standard pipe wrenches.
Will the black finish hold up to outdoor and jobsite conditions?
The protective black coating is designed to resist rust and exposure to common shop and jobsite fluids, making the tool dependable for outdoor work and damp utility spaces.
Can I take this on camping or off-road trips for trail-side repairs?
It is compact enough to pack in a recovery kit or tool bag, and the adjustable jaw covers most spin-on filters found on trucks and SUVs used for overlanding and off-road recreation.
Will it work in cold weather when my hands are stiff?
The soft nonslip red grips stay flexible in cooler conditions and provide the leverage needed to free filters that have tightened from thermal cycling on older outdoor-stored vehicles.
Can I use this on a boat or marine engine?
Spin-on marine oil filters fall within the 2-3/8 to 4-1/2 inch range covered by the jaw, so the same tool you use in the driveway works dockside on outboard and inboard engine service.
Is this a good tool for driveway oil changes on older vehicles?
Older cars often have filters seized by heat and corrosion, and the high carbon steel jaw combined with extended handle length is built specifically to break those stubborn filters free.
Will it help me service equipment in the yard, like a riding mower?
Many small engine oil filters fall within the jaw's range, and the bent head is helpful in the tight engine compartments typical of lawn and garden equipment.
Does it work in an open carport where I have less leverage room?
The bent head angles the jaw into the filter while the handle stays in a comfortable arc, which is ideal when you cannot stand fully upright beside the vehicle in a low-clearance carport.
How do these compare to carrying a full pipe wrench set outdoors?
A dedicated pipe wrench set is heavier and bulkier, while these pliers cover a similar range of round fittings in a single 12-inch tool, which is far more portable for outdoor jobs.
Are these better than a strap wrench for outdoor plumbing repairs?
Strap wrenches struggle on chrome or polished fittings, but the serrated jaw of these pliers bites firmly, which is more reliable when working on outdoor hose bibs, irrigation manifolds, and exposed pipe.
How do these compare to a basin wrench for outdoor faucet work?
A basin wrench is specialized for under-sink faucet nuts and not versatile, while these pliers handle a wide range of round fittings, making them the more flexible outdoor tool.
What if the tool gets rained on during an outdoor job?
The protective finish and sealed pivot resist short-term moisture exposure, though like any steel tool, wiping it down and storing it indoors will extend its service life.
Will it hold up to dirt and dust at a jobsite?
The closed-joint Permalock design keeps contaminants out of the pivot, which is a common failure point on adjustable pliers exposed to jobsite dust and grit.
What if I need to work in low light outdoors?
The bright red grips make the tool easy to locate in a cluttered work area or low-light jobsite, and the handle visibility helps you find it quickly between tasks.
How do I adjust the jaw to fit my oil filter?
Open the handles fully, rotate the knurled adjuster at the end of the handle until the jaw opening matches the diameter of your filter, then squeeze the handles to lock the jaw around the filter before turning.
What is the correct way to use the bent head to avoid stripping the filter?
Seat the jaw as low on the filter canister as possible, apply steady even pressure, and turn counterclockwise to loosen. Keep the tool perpendicular to the filter to prevent the serrations from slipping and deforming the canister.
How do I maintain the pliers so they last for years?
Wipe the tool clean after each use, occasionally apply a drop of light oil to the pivot and adjuster threads, and store it indoors or in a dry toolbox to prevent rust on the black protective finish.
Will this fit my specific vehicle's oil filter?
The jaw adjusts from 2-3/8 to 4-1/2 inches (60 to 102mm), which covers the vast majority of spin-on oil filters on passenger cars and light trucks from domestic, Asian, and European manufacturers. Always measure your filter if it appears unusually large or small.
Does it work on cartridge-style oil filters that go inside a housing?
These pliers are designed for spin-on canister-style filters. For cartridge filters inside a plastic or metal housing, you will need a cartridge wrench or socket sized to the housing cap rather than these pliers.
What is included in the box when I order these pliers?
The package contains one WORKPRO 12-inch adjustable oil filter pliers. No additional accessories, filters, or attachments are included, and no separate purchases are required to put the tool to work.
Is it safe to use on a plastic or composite oil filter canister?
Use caution on plastic filters. The serrated jaw can crush or crack a plastic canister if excessive force is applied. For plastic filters, consider a strap or cap-style wrench instead, and reserve these pliers for metal canister filters.
Will the jaw teeth damage the filter so it cannot be reused?
Spin-on oil filters are intended to be replaced at every oil change, so minor surface marks from the jaw teeth are expected and will not affect filter performance before disposal.
What is the difference between oil filter pliers and an oil filter socket?
An oil filter socket is a specific-diameter cup that fits over the end of the filter and is turned with a ratchet, requiring a different socket for each filter size. Oil filter pliers are adjustable across a wide size range, can reach filters in tight or recessed locations, and also double as a pipe wrench for non-automotive tasks.
